Elemental Motors

INTRODUCING QUANTUM FLUX™

Rethink
What Electric
Can Do.

Hydraulic power. Electric Efficiency.

Extraordinary force and speed. One compact, fully integrated servo-electric actuator. No pump. No hoses. No valves. No leaks.

GEARLESS. BRUSHLESS. ALL ELECTRIC.Quantum Flux integrated electric actuator with aluminum housing and mounting eyes
3.0 SAMPLES AVAILABLE NOW
SMALL ACTUATOR. SERIOUS POWER.ENGINEERED IN FLAGSTAFF, ARIZONA

01 / PERFORMANCE

Hydraulic numbers.
Electric actuator.

The force and speed you need, without the hydraulic system behind them.

PEAK FORCE2,700lbf

12.0 kN

MAXIMUM SPEED8.0in/sec

203 mm/s

OUTPUT POWER3.5hp

2.6 kW

WEIGHT<10lb

At 8-inch stroke

4.0 production specifications · Planned availability Q1 2028. Available 3.0 samples deliver 2 hp, 1,900 lbf and 6.7 in/sec in the same envelope. Peak force and maximum speed are separate ratings; contact engineering for your duty point.

02 / A DIFFERENT CLASS OF ELECTRIC

More power.
Less mess.

Hydraulics deliver force. But the pump, motor, reservoir, valving, filters and hoses all need space, service and energy. Quantum Flux brings the axis into one sealed package.

See what makes it possible
1.5-IN HYDRAULIC CYLINDER @ 1,500 PSI4.0 hp~2,650 lbf · 10 in/sec
QUANTUM FLUX 4.0 / PRODUCTION3.5 hp2,700 lbf · 203 mm/sec · Gearless, brushless
CATALOG HEAVY-DUTY ELECTRIC ACTUATOR0.14 hp10 kN · 9 mm/sec · Three-stage gearing

Published catalog figures on file; comparator model and date available on request.

03 / THE TECHNOLOGY

It starts
with the motor.

The physics is not new.
The topology is.

Compact Quantum Flux stator alongside the larger brushed motor and three-stage gearbox it replaces
Left: Quantum Flux stator. Right: the motor and three-stage gearbox it replaces.
01

A patented hyper-torque topology

A transverse-flux architecture shares flux between phases and folds six shear planes into a short axial length, reaching essentially the full outside diameter.

02

Up to 2.5 Tesla in the airgap

Tapered geometry concentrates airgap flux, adds structure and reduces core losses. High torque without brushes, liquid cooling or a gearbox.

03

Direct to the screw

Enough torque to drive the screw directly. Removing three gear stages removes a major loss and wear path, making the actuator narrower and less than half the height of the catalog comparison unit.

04 / THE ENVELOPE

Fits where the
cylinder already is.

A compact section with the motor, drive and feedback inside. Sample and production units share dimensions, mounting configuration and stroke options.

Dimension drawing comparing a standard industrial actuator above with Quantum Flux below
Top: catalog industrial actuator, 0.14 hp / 10 kN.
Bottom: Quantum Flux, 3.5 hp / 12 kN. Both shown at 200 mm stroke.
WIDTH
64 mm
HEIGHT
68 mm
PIN-TO-PIN / 203 MM STROKE
428 mm / 16.8 in
PIN-TO-PIN WITH BRAKE
17.5 in

05 / INTEGRATION

Seven components.
Now one.

One part. One connector. One cable.
Motor, screw drive, GaN servo drive, position feedback, CAN communications and cylinder in one housing.

Complete Quantum Flux actuator
01

Integrated servo drive

  • 2 kW GaNFET FOC drive
  • Up to 4 kW in production
  • 96 V bus; 135 V withstand
  • 12-bit absolute encoder
02

CAN communications

  • CANopen and SAE J1939
  • CAN 2.0B at 1 Mbit/s
  • CAN FD at 5 Mbit/s — planned
  • Custom message formats on request
03

Closed-loop control

  • Torque control
  • Velocity control
  • Position control
  • Third-order motion profiles

06 / SPECIFICATIONS

Develop on the sample.
Ship on the production part.

Same envelope. Same mounting. A purpose-built motor for production.

Specification3.0 Development samples4.0 Production
Output power2 hp / 1.5 kW3.5 hp / 2.6 kW
Peak force1,900 lbf / 8.45 kN2,700 lbf / 12.0 kN
Maximum speed6.7 in/sec / 170 mm/s8 in/sec / 203 mm/s
MotorCurrent robot motorQF57-34-17MAX
Drive electronics2 kW GaNFET FOCUp to 4 kW GaNFET FOC
Bus voltage48–96 VDC24–96 VDC
Weight at 8-inch stroke<10 lb<10 lb
Pin-to-pin with brake17.5 in17.5 in
ProtectionIP67IP67
AvailabilityAvailable nowQ1 2028 (planned)

Specifications from the Quantum Flux product brief. Production availability is planned for Q1 2028. Application performance depends on force, stroke, speed and cycle rate.

07 / LESS ENERGY. MORE POSSIBILITY.

Power the motion.
Lose the plumbing.

On a battery machine, efficiency becomes runtime. Quantum Flux is designed to use roughly half the energy of an equivalent hydraulic axis, depending on the duty cycle.

CONVENTIONAL HYDRAULICS

Battery Motor Pump Fluid Valve Cylinder

WITH QUANTUM FLUX

Battery Actuator.

No pump idling

No hydraulic pump running to keep pressure up while the axis holds position.

Regenerative motion

Lowering a load can return energy to the bus instead of losing it through a heat exchanger.

Built for real machines

Version 2.75 actuators have been cycling in an OEM endurance fixture under 45 lb plate loading. Version 3.0 samples use the same motor; 4.0 adds a purpose-built motor.

YOUR MOVE

Bring us
a duty point.

Force. Stroke. Speed. Cycle rate.

Start with an NDA. Our engineering team will return a force–velocity analysis and recommended actuator within five business days.

support@elementalmotors.com

ELEMENTAL MOTORS · SUPPORT
Elemental Motors · Flagstaff, Arizona

Tell us what needs to move.

Orders & order support: support@elementalmotors.com

Opens your email app with these details. Nothing is sent automatically.